Insta360 an R vertical battery base allows you to set up the ONE R camera vertically for a variety of applications, including mounting on the optional ONE R drone mount.

The Core module is installed on the top of the base, and the lens module is installed on the top of the Core. Compatible with all lens modules, including: 360 Mod, 1" Mod and 4K Mod.

The base and Insta360 ONE R camera can be further installed in the vertical bumper shell, which can neatly wrap the entire device.

The vertical battery base provides a 1/4"-20 tripod mount at the bottom, and an optional bumper housing allows access to the threaded mount.

Only when the 360 Mod is installed in the optional ONE R Dive Case for Dual-Lens 360 Mod, the vertical battery base can be used for underwater activities.

Dive Case is a vertical diving case specially designed for this type of setup.

There is a USB Type-C interface on the top of the vertical battery holder to connect to the Core module, and there is a USB Type-C charging interface with a charging indicator on the side.

The side port is only for charging and does not support data transmission or ONE R microphone adapter.

Use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod or for vertical handheld shooting.

Note

• Designed for use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod, or for vertical handheld shooting. Avoid using it in high-action environments or in water. For select action environments, you can use the Vertical Bumper Caser (sold separately). 
• Insta360 ONE R is not waterproof when using the Vertical Battery Base without the Dive Case for Dual- Lens 360 Mod. 
• The Vertical Battery Base does not support the Mic Adapter or Transfer Cable. The port is for charging only.
• The Vertical Battery Base works with any Insta360 ONE R Mod, not just the Dual-Lens 360 Mod.
• The USB Type-C Male Port connects to the Core's USE Type C port to deliver power to the Core (Before use, remove the lock cover on the Core). 

For Wide Angle Mod (4K / 1-Inch)

IPX8 water-resistant, protecting your ONE R for deep-water diving

How to use

 Note: The following instructions use the Dive Case for 1-inch wide mod as an example.

1. Open the case

Hold the dive Case with the arrow pointing to your left, as shown.

Push the lock lever to the left (1),

then pull down from the second arrow (2). Remove it from the hook (3). When the buckle is completely disengaged, open the Dive Case.

2. Insert the Camera

Be sure to insert the camera in the correct direction.

* When using the Dive Case for 1-inch Wide Angle Mod,

remove its protective lens first.

When using the camera in water, please lock the touch screen to avoid accidental presses.

When inserting the camera, take care not to scratch the lens.

3. Attach the Anti-Fog Inserts

Ensure that anti-fog inserts are inserted as shown below.

* When using the third-party anti-fog inserts, ensure that the size is within  25x16x1 mm. 

If the anti-fog inserts are too large, they will cause water leakage, damaging the camera.

4. Close the Case

To close the Dive Case, latch the buckle with the hook and push the buckle until it clicks.

* Ensure the Dive Case is firmly closed. Be sure that the parts of the Dive Case in contact with its rubber seal are free of dirt or dust.

For the best results, keep the lenses of the Dive Case clean.

5. Attach the Stability Pads

When connecting the Dive Case to other accessories, such as the floating hand grip, be sure to stick a stability pad to the screw points. 

For Dual-Lens 360 Mod

*Bottom obstruction coverable by logo in app or by reframing your shot. 

Explore deeper.

Perfect for diving and other underwater uses.

This version of Insta360 ONE R diving box supports the dual-lens 360 Mod of the vertical ONE R camera system, which is designed for underwater 360-degree video and photo shooting.

This diving box requires the use of Insta360 ONE R vertical battery base accessories. Once assembled into the camera core module and dual-lens 360 modules, the camera components can be inserted into the diving box.

This high-quality diving room allows you to explore depths up to 30 meters (98.4 feet), which is perfect for deep water snorkeling or scuba diving. There is a standard 1/4-20" threaded mount at the bottom of the diving box, which can be matched with almost any handle mount.

How to use

1. Build ONE R

Remove the Core's lock cover and place into the slot on the Vertical BNattery Base.

* Assemble all parts and press them together until they connect firmly.

Designed for ONE R Vertical Battery Base.

The Vertical Battery Base is sold separately. 

2. Open the Case

Push up the lock lever to the Dive Case(1),

then pull down from the second arrow (2). Remove it from the hook (3).

When the buckle is completely disengaged, open the Dive Case (4).

3. Insert the Camera

Be sure to insert the camera in the correct direction.

* Lock the touch screen to avoid accidental presses.

When inserting the camera, take care not to scratch the lens.

4. Attach the Anti-Fog Inserts

Insert the 3 anti-fog inserts as shown below.

* When using the third-party anti-fog inserts, ensure that the size is within  25x16x1 mm for the lid inserts and 32x16x1.5 mm for the main body inserts.

If the anti-fog inserts are too large, they will cause water leakage, damaging the camera.

5. Close the Case

To close the Dive Case, latch the buckle with the hook and push the buckle until it clicks.

* Ensure the Dive Case is firmly closed and free of dirt or dust.

For the best results, keep the lenses of the Dive Case clean.

Please read the product manual in the box before using the dive case.

 Specifications

Compatibility: Insta360 ONE R Dual-Lens 360 Mod with Vertical Battery Base 

Weight: 159g 

Size: 144 x 81 x 78.5 (mm)

Working Temp: 59° to 77° F

Waterproof Depth: Up to 30m (98.4ft)

For Dual-Lens 360 Mod

Fear Scratches no more. 

Hardened, reinforced lens guards for Dual-Lens 360 Mod

Charges 2 batteries at once, in a smart sequence, based on battery levels

2x Faster Charge

Charges both standard Battery Base and Boosted Battery Base

*Always use an insta360-approved charge cable or hub to charge the Insta360 ONE R Battery Base

*Boosted Battery Base has twice the capacity of the standard Battery Base.

Note: The Boosted Battery  Base comes  with Folding Mount Points that can be used with invisible selfie sticks and sports accessories

How to use?

Line up the charging points and push that Battery Base onto the Fast Charge Hub until it clicks into place.

Charge one or two batteries at once, including both standard ONE R Battery Bases and ONE R Boosted Battery Bases. 

The indicator light will change to green when fully charged. 

Push the battery buckle to remove the Battery Base. 

Accessory Shoe Mounting Bracket

How to use - Standard Mounting Bracket

Working Temperature: 5°C-40°C

(Charging may be slower when used below 10°C)

Clear Charge Indicators

Fast Charge Hub

Specifications

Material: PC

Weight: 85.3g

Dimensions: 74*60.3*30 mm

Power input: 9V/2A 5V/2A

Charging: Type C

Compatibility: Insta360 ONE X2 Battery

In the Box

1x Charge Hub

1x Cable

1x User Guide

Rechargeable Lithium Polymer Battery

Backup or replacement battery for ONE X2

Important notes

1. Always use an Insta360 approved adapter or Fast Charge Hub to Charge ONE X2 batteries.

2. Acceptable battery charging temperatures range from 0℃-40℃ (32℉-104℉).

3. Insert the battery into the Fast Charge Hub's battery slot with the battery's charging point lined up on the same side of the status indicators.

4. A 9V/2A power adapter is suggested. Using an adapter above 9V/2A may not increase the charging speed; When an adapter below 9V/2A is used, the hub will not be able to charge three batteries at the same time, which leads to a longer charging time.